# WFly 2

## Details

**Protocol Number:**  79\
**Autobind:**  No\
**Channel Re-mapping:**  No\
**Extended Limits:**  Yes\
**Failsafe Support:**  Yes\
**Receiver Match:**  Yes\
**Telemetry:**  Yes\
**Option Value:**  0 = WBUS; 1 = PPM\
**Firmware Version:**  v1.3.1.92

## Notes

**Models:**  WFly receiver models RF201S, RF206S, RF207S, RF209S

Failsafe fully supported (value, hold and no pulse).

Telemetry enabled for A1=RX\_Batt (Ratio 12.7), A2=Ext\_Batt (Ratio 12.7), RX RSSI, TX RSSI, TX LQI (100=all telem packets received...0=no telem packets).

## Channel Assignment

| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | CH9 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | CH9 |


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://www.multi-module.org/using-the-module/protocol-details/wfly-2.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.