H8 3D
Protocol Number: 36
Autobind: Yes
Channel Re-mapping: Yes
Extended Limits: No
Failsafe Support: No
Receiver Match: No
Telemetry: No
Option Value: N/A
None
CH1 | CH2 | CH3 | CH4 |
A | E | T | R |
Models: Eachine H8 mini 3D, JJRC H20/H22/H11D
CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | CH9 | CH10 | CH11 | CH12 | CH13 |
A | E | T | R | Flip | Light | Picture | Video | OPT1 | OPT2 | CAL1 | CAL2 | Gimbal |
H8 3D Channels
- OPT1 = RTH, then press a direction to enter headless mode (like stock transmitter),
- OPT2 = switch 180/360° flip mode
- CAL1 = accelerometer calibration
JJRC H20 Channels
- OPT1 = Headless
- OPT2 = RTH
- CAL1 = H20/H20H - headless calibration
- CAL2 = accelerometer calibration
JJRC H22 Channels:
- OPT1 = RTH
- OPT2 = 180/360° flip mode
Models: JJRC H20H
Channels: CH6 = Motors on/off
Models: JJRC H20 Mini
Notes: Only three transmitter IDs are available. Change Receiver Num value to cycle through them.
Models: JJRC H30 Mini
Notes: Only three transmitter IDs are available. Change Receiver Num value to cycle through them.
Last modified 3yr ago